Go Back to 100kGarages.com
sign up or log-in


Small-scale machining

Posted by Tim Morales 
Small-scale machining
April 25, 2012 11:23PM
Is anyone capable of machining out small parts from 1/8 in. brass sheet? The parts are between 1/2 in and 3/4 in in dimensions. Some parts need small holes (1/32 in. diamater), or if this is not possible, small marks etched on the surface to mark the positions of the holes. If this is possible, how far apart should I position my parts? I'm looking to have a 1 ft x 1 ft square sheet milled down to start. If anyone knows anything or can help, that would be great! It has been hard to find information about miniature machining. Thanks.

Edited 2 time(s). Last edit at 04/25/2012 11:40PM by Tim Morales.
Re: Small-scale machining
August 25, 2012 11:36AM
Hello IM Los Angeles I can do it. Please let me know , If you still need somebody to complete your project.

Thank you

Edward D Mozina
Re: Small-scale machining
November 22, 2013 02:36PM
Happy to look at this, Tim.
We've been machining small parts for cameras for 40 years.
Tell me what you need.
Re: Small-scale machining
April 13, 2014 11:20PM
I also need machining my cameras
Sorry, only registered users may post in this forum.